Transistor Tester Capacitor ESR Meter Inductance Resistor NPN/PN x 4

4 Axis Mach3 USB CNC Motion Controller Card Interface Breakout B x 2

     0 reviews  |  Write a review
Product Code: 20-019-211
Availability: In Stock



  • 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
  • 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
  • 3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc.
  • 4. Support for connecting electronic handwheel;
  • 5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
  • 6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
  • 7. 1 status LED, indicate connection status on the board.

There are no reviews for this product.

Write a review

Note: HTML is not translated!